Polk Audio SurroundBar
Listen to Innovation-
The Polk Audio SurroundBar is designed to complete your High Definition TV experience. It’s the perfect match for flat-panel and shallow screen TVs. And it works with any surround sound receiver.
Patented SDA Surround technology-
Our patented SDA Surround technology means there’s no need to install rear speakers. SDA Surround creates a completely immersive experience, as if there were dozens of speakers all around you. This technology is based on fundamental research into the way our ears process sound and perceive the direction of sounds.
The SurroundBar works in any room-
SDA Surround is not dependent on your room's walls to produce the surround effect.
It uses a patented combination of signal processing and acoustical geometry that complements the spacing between your ears to produce surround sound without the need for rear mounted speakers.
Since the SurroundBar works directly with the hearing mechanism and requires no special room characteristics, it can deliver a room-filling surround experience in nearly any location in almost any type of room.
Versatile Installation-
Installation versatility is designed in. You can wall mount the SurroundBar right below your flat-panel TV. Or use the included cradle on a TV stand, a shelf or for set-top placement. The Polk Audio SurroundBar is a welcome addition for anyone who wants all the thrills of surround sound…but none of the hassles.
Simple Color Coded Hook-up-
The SurroundBar is simple to set up. A 25-foot 10-conductor cable is color-coded and clearly marked for easy hookup, even your kids can do it. Who are we kidding, your kids probably do all the wiring in the house, right?
The SurroundBar features:
The SurroundBar’s unobtrusive design and color-coded hookup configuration make it a welcome addition for anyone who wants the thrilling benefits of surround sound and none of the hassles
-Polk's patented SDA Surround technology delivers a vivid sound field from a single, 43-inch long cabinet. No rear speakers are required.
-Easy to install thanks to a simple wall-mount bracket
-Separate cradle for mounting on a TV stand, a shelf or for set-top placement.
-Seven 3 ½" Dynamic Balance Drivers and three ¾" Dynamic Balance Dome Tweeters deliver clear, natural midrange, high frequencies and lifelike imaging.
-Aluminum extruded enclosure eliminates cabinet resonance.
-Anti-diffraction grille and bezel help create open, spacious imaging.
-Magnetically shielded, of course, for safe placement on or near TVs.
-Simplified color-coded hookup with all 5 channels of information going directly from your home theater receiver to the SurroundBar.
-25-foot 10-conductor cable is color-coded and clearly marked for easy hookup. No more tangled wires to string around a room.
Specifications:
| Driver Complement: |
| Midrange |
7 - 3-1/2" Diameter (8.89cm)
|
| Tweeter |
3 - 3/4" Diameter (1.91cm)
Silk/Polymer composite dome |
| Electrical |
| Lower -3dB Limit |
100 Hz |
| Upper -3dB Limit |
20 kHz |
| Nominal Impedance |
8 ohms |
| Recommended Amplifier
Power |
20 - 125 w/channel |
| Efficiency |
89 dB |
| Dimensions: |
| Cabinet Size |
4-7/16" H x 42-5/8" W x 5-1/8"
D
(11.27cm H x 108.27cm W x 13.02cm D) |
| Shipping/Other: |
|
| Product Weight |
25.00 lbs. (11.34kgs) |
| Shipping unit: |
each |
| Total Shipping Weight |
30.00 lbs. (13.61kgs) |
| Speaker Warranty |
5 years parts and labor (original purchaser) |
| Accessories (comes with) |
2 piece wall bracket, center channel base,
25' wire bundle, and the Quick Start Guide |
Shop us with confidence! The manufacturer's limited warranty is valid on this item because we are Authorized Dealers.